Format: Paperback
The straightforward electrical problems were Volume One. This is where the investigation gets harder. Automotive Electrical Diagnostic Manual, Volume Two — The Investigation puts established diagnostic principles to work on the faults that do not provide a clean answer. Written for working automotive technicians, Volume Two moves into ABS and wheel-speed circuits, stability control, electric power steering, electronic parking brakes, 4WD/AWD controls, body electronics, HVAC controls, starting authorization, intermittent faults, inaccessible wiring, previous repairs, misleading electrical readings, and multiple-fault vehicles. The emphasis remains on practical diagnosis using equipment found in real repair bays: visual and mechanical inspection, scan data, wiring diagrams, DVOM testing, voltage drop, circuit loading, current, movement, feedback, and meaningful bench testing. The vehicle does not always cooperate. The code may identify the system without identifying the failure. A correct electrical reading can support the wrong conclusion. Mechanical problems can corrupt electrical information. Weather, corrosion, previous repairs, aftermarket equipment, or a new replacement part can change the investigation completely. Read more
Follow the Evidence. Find the Fault. Two volumes. One diagnostic approach: test intelligently, trust the evidence, and stop guessing. Electrical diagnosis is not about replacing parts until the problem disappears. It is about proving what the circuit is doing and why. The Automotive Electrical Diagnostic Manual series builds a practical approach around voltage, current, resistance, voltage drop, wiring diagrams, circuit behavior, and disciplined testing. Volume One establishes the diagnostic foundation. Volume Two takes that thinking into difficult real-world faults, where symptoms can mislead, circuits interact, and the strongest diagnosis comes from following the evidence. Volume One: Build the Diagnostic Foundation Learn to approach electrical faults logically instead of chasing symptoms. Volume One develops the fundamentals of circuit testing, meter use, voltage drop, wiring diagrams, grounds, opens, shorts, and test strategy, with the emphasis on understanding what each measurement proves before replacing parts. Volume Two: Investigate the Difficult Faults Take the same diagnostic discipline into harder faults: intermittent problems, network and module concerns, wiring and connector failures, misleading symptoms, and faults that appear only under certain conditions. Volume Two focuses on investigation, test order, evidence, and proving the failure before committing to the repair. Built for the Bay, Not the Classroom Practical tests that help turn electrical symptoms into evidence. Use measurements to prove the fault before replacing parts. Move from symptom to circuit to cause with a repeatable diagnostic process
The straightforward electrical problems were Volume One. This is where the investigation gets harder. Automotive Electrical Diagnostic Manual, Volume Two — The Investigation puts established diagnostic principles to work on the faults that do not provide a clean answer. Written for working automotive technicians, Volume Two moves into ABS and wheel-speed circuits, stability control, electric power steering, electronic parking brakes, 4WD/AWD controls, body electronics, HVAC controls, starting authorization, intermittent faults, inaccessible wiring, previous repairs, misleading electrical readings, and multiple-fault vehicles. The emphasis remains on practical diagnosis using equipment found in real repair bays: visual and mechanical inspection, scan data, wiring diagrams, DVOM testing, voltage drop, circuit loading, current, movement, feedback, and meaningful bench testing. The vehicle does not always cooperate. The code may identify the system without identifying the failure. A correct electrical reading can support the wrong conclusion. Mechanical problems can corrupt electrical information. Weather, corrosion, previous repairs, aftermarket equipment, or a new replacement part can change the investigation completely. Read more
Follow the Evidence. Find the Fault. Two volumes. One diagnostic approach: test intelligently, trust the evidence, and stop guessing. Electrical diagnosis is not about replacing parts until the problem disappears. It is about proving what the circuit is doing and why. The Automotive Electrical Diagnostic Manual series builds a practical approach around voltage, current, resistance, voltage drop, wiring diagrams, circuit behavior, and disciplined testing. Volume One establishes the diagnostic foundation. Volume Two takes that thinking into difficult real-world faults, where symptoms can mislead, circuits interact, and the strongest diagnosis comes from following the evidence. Volume One: Build the Diagnostic Foundation Learn to approach electrical faults logically instead of chasing symptoms. Volume One develops the fundamentals of circuit testing, meter use, voltage drop, wiring diagrams, grounds, opens, shorts, and test strategy, with the emphasis on understanding what each measurement proves before replacing parts. Volume Two: Investigate the Difficult Faults Take the same diagnostic discipline into harder faults: intermittent problems, network and module concerns, wiring and connector failures, misleading symptoms, and faults that appear only under certain conditions. Volume Two focuses on investigation, test order, evidence, and proving the failure before committing to the repair. Built for the Bay, Not the Classroom Practical tests that help turn electrical symptoms into evidence. Use measurements to prove the fault before replacing parts. Move from symptom to circuit to cause with a repeatable diagnostic process