Format: Paperback
A geotechnical factor of safety comes back at 0.9. Somewhere upstream, a hazard analysis set the design ground motion; somewhere downstream, a structural engineer is waiting to know whether a shallow foundation is still viable. Turning that number into a defensible design decision is the real work of seismic geotechnical engineering — and it is exactly what this textbook teaches, from first principles through to a finished design. Most books teach the pieces of that chain as separate subjects, and almost none teach it against more than one governing design-code framework at once. An engineer who has only worked one seismic design tradition tends to treat its conventions as universal, until a project crosses into a jurisdiction that governs seismic design differently. An engineer who learned liquefaction evaluation, slope stability, and foundation design as separate subjects has to reassemble, under deadline pressure, how one site's hazard and subsurface conditions constrain every later decision. This is a textbook built to close both gaps, not a reference that assumes them closed already. It teaches the full seismic geotechnical design sequence as one continuous, cross-referenced chain — from hazard analysis, through site investigation and dynamic soil properties, through liquefaction and slope stability, through retaining structures and foundations, through soil-structure interaction and ground improvement, to performance-based retrofit and, finally, to lifelines, dams, levees, and waterfront structures. Nearly every major method is developed twice, once against a governing United States design-code framework and once against a governing European framework, with a consolidated comparison table. Each chapter opens with stated learning objectives and closes with practice problems and a full answer key, and a single worked project runs through all sixteen, so early results become later design inputs you have already practiced applying. Work through this textbook and you will be able to: derive a site-specific design ground motion using deterministic and probabilistic hazard methods, under either governing framework; classify a site and select defensible dynamic soil properties from field and laboratory data; run a site response analysis and judge how a soil profile amplifies or reduces shaking at the surface; evaluate liquefaction triggering, settlement, and lateral spreading using current field-based procedures; assess seismic slope stability and estimate permanent displacement; design retaining structures and foundations, shallow and deep, for combined static and seismic loading; and judge when soil-structure interaction matters, select ground improvement techniques, and carry a performance-based evaluation through to a seismic retrofit recommendation. Every chapter shares that same teaching structure — objectives, theory, worked examples, practice problems with a full answer key, a summary, and a key-facts table — and the book closes with a full glossary and symbol/abbreviation list, a United States/European code-comparison quick reference, a liquefaction-triggering procedure summary, typical dynamic soil property ranges, unit conversion factors. This textbook is written for practicing geotechnical and structural engineers doing seismic work; graduate students building seismic competence on an existing soil-mechanics and structural-dynamics foundation; and engineers who need genuine fluency in both major seismic design-code traditions. It assumes a working foundation in soil mechanics and structural dynamics going in, rather than re-teaching either. Take the next step toward a genuinely connected understanding of seismic geotechnical design, from hazard through retrofit, in both major code traditions — with a textbook built to be studied once and kept as a reference for years afterward. Read more
A geotechnical factor of safety comes back at 0.9. Somewhere upstream, a hazard analysis set the design ground motion; somewhere downstream, a structural engineer is waiting to know whether a shallow foundation is still viable. Turning that number into a defensible design decision is the real work of seismic geotechnical engineering — and it is exactly what this textbook teaches, from first principles through to a finished design. Most books teach the pieces of that chain as separate subjects, and almost none teach it against more than one governing design-code framework at once. An engineer who has only worked one seismic design tradition tends to treat its conventions as universal, until a project crosses into a jurisdiction that governs seismic design differently. An engineer who learned liquefaction evaluation, slope stability, and foundation design as separate subjects has to reassemble, under deadline pressure, how one site's hazard and subsurface conditions constrain every later decision. This is a textbook built to close both gaps, not a reference that assumes them closed already. It teaches the full seismic geotechnical design sequence as one continuous, cross-referenced chain — from hazard analysis, through site investigation and dynamic soil properties, through liquefaction and slope stability, through retaining structures and foundations, through soil-structure interaction and ground improvement, to performance-based retrofit and, finally, to lifelines, dams, levees, and waterfront structures. Nearly every major method is developed twice, once against a governing United States design-code framework and once against a governing European framework, with a consolidated comparison table. Each chapter opens with stated learning objectives and closes with practice problems and a full answer key, and a single worked project runs through all sixteen, so early results become later design inputs you have already practiced applying. Work through this textbook and you will be able to: derive a site-specific design ground motion using deterministic and probabilistic hazard methods, under either governing framework; classify a site and select defensible dynamic soil properties from field and laboratory data; run a site response analysis and judge how a soil profile amplifies or reduces shaking at the surface; evaluate liquefaction triggering, settlement, and lateral spreading using current field-based procedures; assess seismic slope stability and estimate permanent displacement; design retaining structures and foundations, shallow and deep, for combined static and seismic loading; and judge when soil-structure interaction matters, select ground improvement techniques, and carry a performance-based evaluation through to a seismic retrofit recommendation. Every chapter shares that same teaching structure — objectives, theory, worked examples, practice problems with a full answer key, a summary, and a key-facts table — and the book closes with a full glossary and symbol/abbreviation list, a United States/European code-comparison quick reference, a liquefaction-triggering procedure summary, typical dynamic soil property ranges, unit conversion factors. This textbook is written for practicing geotechnical and structural engineers doing seismic work; graduate students building seismic competence on an existing soil-mechanics and structural-dynamics foundation; and engineers who need genuine fluency in both major seismic design-code traditions. It assumes a working foundation in soil mechanics and structural dynamics going in, rather than re-teaching either. Take the next step toward a genuinely connected understanding of seismic geotechnical design, from hazard through retrofit, in both major code traditions — with a textbook built to be studied once and kept as a reference for years afterward. Read more